Newland NLS-EM1300 Integration Manual Download Page 86

Page: 86 / 136

nlscan.com

Page 77

Symbols

Tools

Code Programming ON

Code Programming OFF

Interleaved 2 of 5

Check Digit

Interleaved 2 of 5 may include Check Digit (not compulsory) following its

barcode messages. If included, it could be the last digit. It veri

ﬁ

es the barcode

message.

“

NO Check, Transmit All

”

means to read without check and transmit

all bytes including barcode message and Check digit.

“

Check, Do Not Transmit Check Digit

”

means to read and check. If

veri

ﬁ

cation is successful, transmit barcode message; if not, engine sends an

error beep.

“

Check, Transmit All

”

means to read and check. If veri

ﬁ

cation is

successful, transmit all messages; if not, engine sends an error beep.

“

NO Check, Transmit All

”

【

Pro CMD

：

99911203

】

When

“

Check, Do Not Transmit Check digit

”

is enabled and barcode message length

minus one is less than Min Message Length, it will lead to error beep.

E.g.

：

Reading a 4-byte (include check Digit) Interleaved 2 of 5 with the Min Message

Length being 4 bytes and

“

Check, Do Not Transmit Check digit

”

enabled leads to error

beep.

Check, Do Not Transmit Check Digit

【

Pro CMD

：

99911204

】

Check, Transmit All

【

Pro CMD

：

99911205

】

Summary of Contents for NLS-EM1300









































































































































Search results

Summary of Contents for NLS-EM1300

Reviews:

Related manuals for NLS-EM1300

Brands by name

Popular brands

Newland NLS-EM1300, Integration Manual

Search results

Summary of Contents for NLS-EM1300

Reviews:

Related manuals for NLS-EM1300

Brands by name

Popular brands