Newland NLS-EM1300 Integration Manual Download Page 119

Page: 119 / 136

nlscan.com

Page 110

Symbols

Tools

Code Programming ON

Code Programming OFF

Plessey

Check Digit

Plessey may include Check Digits (not compulsory) following its barcode

messages. If included, they are the last two digit. They veri

ﬁ

e the barcode

message.

“

NO Check, Transmit All

”

means to read without check and transmit

all bytes including barcode message and Check Digit.

“

Check, Do Not Transmit Check Digit

”

means to read and check. If

veri

ﬁ

cation is successful, transmits barcode message; if not, engine sends an

error beep.

“

Check, Transmit All

”

means to read and check. If veri

ﬁ

cation is

successful, transmits all messages; if not, engine sends an error beep.

When

“

Check, Do Not Transmit Check Digit

”

is enabled and barcode message length

minus one is less than Min Message Length, it will lead to error beep.

E.g.

：

Reading a 4-byte (include Check Digit) Plessey with the Min Message Length being

4 bytes and

“

Check, Do Not Transmit Check Digit

”

enabled leads to error beep.

NO Check, Transmit All

【

Pro CMD

：

99913003

】

Check, Do not transmit Check Digit

【

Pro CMD

：

99913005

】

Check, Transmit All

【

Pro CMD

：

99913004

】

Summary of Contents for NLS-EM1300









































































































































Search results

Summary of Contents for NLS-EM1300

Reviews:

Related manuals for NLS-EM1300

Brands by name

Popular brands

Newland NLS-EM1300, Integration Manual

Search results

Summary of Contents for NLS-EM1300

Reviews:

Related manuals for NLS-EM1300

Brands by name

Popular brands