Newland NL-8300, User Manual

Page: 30 / 56

④
In Fig3-17 Press 4 to make the test of the wire modem, please see Fig3-22
__ MODEM Test___
1 Country Set 2 Dial
3
Initialize
4 Version
5 Baud Rate Test
Fig3-22
a
、
Press 1 to entry the country setting, there are four choice, can choose the communication
environment base on the requirement. See Fig3-23
zz
1 U.S.A.
2 Fast Connect
3 H9
4 H23
Fig3-23
In Fig3-23 press 5 to choose the all-purpose patch, the system will check the answer tone
when dialing. Press 4 to choose H23 and not check the answer tone when dialing.
b
、
Press 2 to make the test of synchronization.
On synchronization dial state: setting dialing number and TPUD judge the state of
dialing, if dialing fail will display ret=1, successful will
display ret=0.
Introduction: dial number is the same with normal telephone. For example: your can add
the comma inside the dialing number (Switch to the letter input method,
double press .button can input,) every comma means dial delay 2 sec
TPDU: Transfer Protocol Date Unit, not need to any setting.