Newland NL-8300, User Manual

Page: 29 / 56

②
In Fig3-17 Press 2 makes the test of wireless, interface please see Fig 3-20
____ Wireless Test____
1. Open 2 Close
3. Signal 4 COPS
5. Is Connect?
6 Initialize
Fig 3-20
a. Press 1 opens the wireless module
b. Press 2 closes the wireless module
c. Press 3 displays the strength of wireless signal
d. Press 4 read the information of net registration
e. Press 5 check the AT responding
f. Press 6 initial the serial port rate and wireless module
③ In Fig3-17 Press 3 to make the TCP/IP test, interface please see Fig3-21.
1.pppOpen 4.ECHO
2.pppClose 5.CV39
3.Telnet 6.Set IP
Ppp status
： Close
Fig 3-21
PPP is point to point communication protocol
a. Press 1 opens the PPP. Initial the wireless module and search network. Insert the
GPRS/CDMA card, only using GPRS/CDMA to build the physical connection, open PPP
can be succeeded.
b. Press 2 closed wireless module
c. Press 3 open the PPP and make the test of Telnet
d. Press 4 open the PPP and make the echo test
e. Press 5 tests the wireless module power switch.
f. Press 6 set the IP address