Newland NL-8300, User Manual

Page: 14 / 56

2.4 Start-up interface and its main function
Picture below is the default main interface, Down, self-check and management are the
firmware program. Using operation can open the user-defined program, indicate the
current interface’s operation location.
NL8300 V3.58
08 － 04 － 20
10:08:08
Down
load Self
Test Optio
n
Run
After starting, press F1 and F4 can move the cursor to the corresponding icon location. If in
the corresponding icon press ENTER, then the system will run the corresponding program
● Download: Can download user-program, cipher code manage program, download document
to flash disk, remote download user-program, remote download document to
flash disk.
● Self-check: Can do the single test of every function module, if you want to test whether the
module can be a normal work, can use this function to do the test.
● Manage: Using this function must enter the password:”159951”. “Manage” menu is set
operating parameters. For example: the seventh option “language”, you can
choose Chinese or English according to the needs of individually. Save the setting,
all options’ language will display by your choice.
● Running: run the user-define program.
● Electric quantity Icon: In the right there is a icon to show the state of power.
● Wireless icon: If your POS have the wireless module, at the right side of the screen will
show the type of wireless modules and signal strength.