Newland FR4060 Akame, User Manual

Page: 26 / 144

【
Enter Setup
】
**
【
Exit Setup
】
16
Beep on Unknown Character
Due to the differences in keyboard layouts, some characters contained in barcode data may be unavailable on the selected
keyboard. As a result, the scanner fails to transmit the unknown characters.
Scan the appropriate barcode below to enable or disable the emission of beep when an unknown character is detected.
**
【
Do Not Beep on Unknown Character
】
【
Beep on Unknown Character
】
Startup Beep
**
【
Startup Beep On
】
【
Startup Beep Off
】
Beep Indications
Beep Sequence Indication
4 ascending beeps
The scanner is powered up (if the Startup Beep is on).
1 beep
A non-programming barcode was decoded (if the Good Read Beep is on).
2 beeps
A programming barcode was decoded.
3 short low beeps and 2 high beeps
The scanner failed to decode a programming barcode.
1 long low beep
The scanner detected an unknown character when using USB HID-KBW (if the
Beep on Unknown Character is enabled).