Newland FR4060 Akame User Manual Download Page 46

Page: 46 / 144

【

Enter Setup

】

【

Exit Setup

】

Chapter 7 Symbologies

Introduction

Every symbology (barcode type) has its own unique attributes. This chapter provides programming barcodes for

configuring the scanner so that it can identify various barcode symbologies. The more symbologies you enable, the more

slowly your scanner decodes. It is recommended to disable those that are rarely used to improve the performance of the

scanner.

Global Settings

Disable All Symbologies

If the

Disable All Symbologies

feature is enabled, the scanner can only identify the programming barcodes.

【

Disable All Symbologies

】

Enable All Symbologies

If the

Enable All Symbologies

feature is enabled, the scanner will be able to read all supported barcode symbologies as

well as the programming barcodes.

【

Enable All Symbologies

】

Summary of Contents for FR4060 Akame

















































































































































Search results

Summary of Contents for FR4060 Akame

Reviews:

Related manuals for FR4060 Akame

Brands by name

Popular brands

Newland FR4060 Akame, User Manual

Search results

Summary of Contents for FR4060 Akame

Reviews:

Related manuals for FR4060 Akame

Brands by name

Popular brands