Newland FR4060 Akame, User Manual

Page: 32 / 144

【
Enter Setup
】
**
【
Exit Setup
】
22
Continuous Mode
If the Continuous mode is enabled, the scanner automatically activates one decode session after another.
【
Continuous Mode
】
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. If the timeout expires or the
barcode decodes, the decode session stops. It is programmable in 1ms increments from 0ms to 3,600,000ms. The default
setting is 3,000ms.
【
Decode Session Timeout
】
Example: Set the decode session timeout to 1500ms
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode.
3. Scan the numeric barcodes
“1”, “5”, “0” and “0”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode.