Newisys NA-1400, User Manual

Page: 7 / 64

NA-1400 7
Chapter 2
Installation and Setup
Before you Begin
Read the document titled Safety and Regulatory Information , packaged with your NA-1400.
Safety Precautions
• Install the NA-1400 near the socket-outlet you intend to use.
• Ensure that cables do not extend across foot traffic areas or under heavy objects.
• Install the NA-1400 on a smooth, uncarpeted surface, so that the cooling vents are not blocked.
• Install the system away from heat sources, food, and liquids.
• USB ports are for use with mass storage devices, only. These are commonly known as “USB flash
drives,” “USB sticks,” or simply “memory sticks.”
• Do not use the USB ports with devices such as cameras. To store media from cameras and similar
devices, first download the media to your computer, then store the media in the NA-1400.
• Always power down the NA-1400 before you unplug it. (Press the power switch or click Shutdown .)
• After power-down, to disconnect, unplug the power cord from the wall, then unplug it from the NA-
1400. The power cord plug is the system's power disconnection device.
• The NA-1400 has a safety fuse. If the fuse trips, return it to your vendor for repair. Do not attempt to
replace the fuse. It is not a user-replaceable part.
• The maximum ambient operating temperature of the NA-1400 is 40 o C.
Components
Remove the items from the NA-1400 package and check them against the list, below.
In addition to these items, you need an Ethernet cable and either of these Web browsers:
• Microsoft Internet Explorer 5.0 or later.
• Mozilla Firefox 1.0 or later.
Item Quantity
NA-1400 1
External power supply 1
Power cord 1
Hard disk drive carrier (inside the NA-1400) 4
Discovery CD 1