Newisys NA-1400, User Manual

Page: 52 / 64

Configuring Storage Settings
52 NA-1400
5. Click Apply . The pool is built.
Delete a Pool
To delete a pool:
1. Click Storage on the main menu.
2. Click the Pool tab.
3. Click the appropriate pool name. The Properties page displays.
4. Click Delete . A confirmation dialog displays.
5. Click OK . The pool you selected is deleted.
View Properties of a Pool
To view properties of a pool:
1. Click Storage on the main menu.
2. Click the Pool tab.
3. Click the appropriate pool name. The Properties page displays.
Add Components to a Pool
To add new components to a pool:
1. Click Storage on the main menu.
2. Click the Pool tab.
3. Click the appropriate pool name. The Properties page displays.
4. Click Add components . . . A list of available storage objects displays.
5. Select the appropriate objects.
6. Click Apply . The new components are added to a pool.
Note: Components can be added, only. To free components from a pool, it is necessary
to delete the entire pool that uses the components.
Disk Properties
You can view properties of disks that are installed in an NA-1400.
Note: In this section, disk is the same as drive , hard disk drive , or HDD .
View Installed Disks
To view a list of installed disks:
1. Click Storage .
2. Click the Disk tab. A list of the installed disks displays.