Newcon Optik LRM 2000PRO, Operation Manual

Page: 19 / 32

16
 Standard1 : distance is displayed in meters, azimuth is
measured, crosshair reticle is visible, auto target selection is
used;
 Standard2 : distance is displayed in yards, elevation in
degrees
At start the unit assumes Ready to Measure mode with
measurement parameters inherited from the previous setup. At
manufacturing stage the unit is set up into Standard1 set of
measuring parameters.
Mode switching
Pressing M button (3, Fig.1) in Ready to Measure mode switches
the unit between modes of operation:
 Ready to Measure – Ready (9, Fig. 3) is displayed
 Quick link to Standard1 set of measurement parameters
(display name:
Std1
),
 Quick link to Standard2 set of measurement parameters
(display name:
Std2
)
 Setup mode (display name:
COdE
),
 Data Recall mode (display name:
rEc
) and
 Memory Clear mode (display name:
cLr
).
Flashing display name indicates the mode which can be selected
by pressing A button (6, Fig.1).