Newcon Optik LRM 2000PRO, Operation Manual, Page: 24 / 32

21
Choosing
Cd
16
in Setup mode will cause all display
segments and indicators to flash for 8 seconds. Flashing can be
interrupted by pressing either button.
Compass calibration
If the System was exposed to a strong magnetic field the
compass accuracy may diminish. To prevent mistakes compass
will then show 0º in any direction.
To return the compass into working condition:
 Select
Cd
17
in Setup mode
 Keeping the unit horizontally perform one full rotation
around vertical axis within one minute.
 If one rotation does not restore calibration – perform two
rotations.
The normal compass functioning will be restored.
Additional display information
Additional indication is displayed in
Ready to Measure
mode:
Y or M
Indicates that distance is displayed in yards or
meters; elevation may or may not be measured
°
Indicates that only azimuth or elevation is
measured