15
Operation and service modes
The unit has the following modes of operation:
Ready to Measure
– to perform measurements
(Quick link to
Standard1
and
Standard2
set of
measurement parameters appears in mode selection
menu for convenience and does not constitute a separate
mode)
Setup
– to modify the
Ready to Measure
mode parameters,
Data Recall
– to recall the last 10 measurement results,
Data Clearance –
to clear measurement results.
In
Setup
mode four parameters of measurement can be set; these
parameters define:
1.
What the unit measures: distance plus elevation, distance,
azimuth and height
2.
In what units result of distance measurement is displayed:
meters or yards, degrees, kilometre per hour, miles per hour
3.
What reticle shape is visible: rectangular or crosshair, and
4.
Which target is selected: first, last or most reflective (refer to
Target selection logic
for more details.)
Setup
mode is described in more details below.
The unit has two standard sets of
Ready to Measure
mode
parameters:
Summary of Contents for LRM 2000PRO
Page 2: ...ii...