12
Note:
Battery in metal casing will diminish compass accuracy.
Non-magnetic batteries should be used for the utmost compass
performance.
Measuring procedure
When the Rangefinder is off the LCD is blank. To activate it
press and hold A button (6, Fig. 1) for half a second. At start the
unit comes into Ready to Measure
mode indicated by the word
‘READY’ on the display visible through eyepiece.
Pressing A button (6, Fig. 1) in
Ready to Measure
mode initiates
measurement. The result of measurement is displayed in a form
that depends on the measurement parameters (see Setup Mode).
If measurement is unsuccessful four dashes (‘----‘) will be
displayed in the area (4, Fig. 3). For successful measurement the
target must be at least 20 m away.
If more than one parameter is chosen to measure, e.g. distance
and elevation, the results will replace each other on the display
every second.
Maximum distance
Though maximum measurement distance depends on target
reflectivity, weather conditions and other conditions, for most
targets the unit will provide accurate ranging for up to 2,000
meters.
Summary of Contents for LRM 2000PRO
Page 2: ...ii...
