PowerSwap Nucleus MINI System
Owner's Manual |
7
Service
Service/Warnings
Service
In the event the nucleus battery fails to deliver acceptable performance, it must be returned to
newcastle Systems, Inc. no other facility is qualified and equipped to service the nucleus battery and
calibrate the electronic components and sensors. Any attempt by the user or any other unauthorized
persons may result in improper calibration of the electronic components causing severe battery damage
and/or safety hazards, including potential personal injury and/or damage to property. Any such attempt
will void any/all warranties.
Warnings
1. neVer attempt to service this battery. If there is a problem, send this battery only
to newcastle Systems, Inc. for evaluation.
2. neVer attempt to open this battery. The electronic circuits inside the battery can
be damaged, causing malfunction and/or potential hazard to person and property.
3. neVer attempt to replace the cells in this battery - it cannot be rebuilt or refur-
bished. At the end of its useful life, contact newcastle Systems, Inc. Customer Ser-
vice at +1 (781) 935-3450 or [email protected].
Caution
1. Do not expose this battery to extreme high (above 140
o
F /60
o
C) or low (below
32
o
F/ 0
o
C) temperatures. This includes storage in direct sunlight, in cars in hot or
cold weather, or in close proximity to heating/cooling devices. This may cause elec-
trolyte leakage, impaired performance and shortening of battery service life.
2. When not using the battery for prolonged periods, the nucleus battery should be
fully charged.
3. All BATTerIeS have a finite life. If the battery exhibits noticeably shortened run-
time, the battery should be replaced immediately. Shortened run-time is indicative of at least one cell
which has reached end of life. UnDer nO CIrCUMSTAnCeS should one attempt to “recondition” this
battery by repeated charging and discharging.
4. This battery contains specialized electronic circuits, which are designed to protect the cells from over-
charge, over discharge and over current. redundant protection devices are designed to operate if the
battery voltage is abnormally high or low and if the temperature of the battery exceeds operating speci-
fications. These electronic devices can be damaged if the battery is subject to abuse or damage. Do not
use a battery that has been subjected to excessive mechanical shock or water damage.
5. Do not drop, puncture or crush this battery. Do not use the battery if the case is damaged or broken.
Do not open or attempt to service this battery if damaged.
