15
OUTDOOR GFI ELECTRICAL OULET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
NON-COMUSTABLE MATERIAL
H
D
W
PARTITION TO ISOLATE
CYLINDER FROM GRILL
MINIMUM 10 SQ IN (65 SQ CM)
OF VENTILATION REQUIRED ON
EACH END OF CABINET.
MINIMUM 20 SQ IN (130 SQ
CM) OF VENTILATION
REQUIRED ON EACH END OF
CABINET.
5"
127mm
MAXIMUM
1"
25.4mm
MAXIMUM
2.375” Dia
0.39"
1.19"
Installing DSB on custom built cabinet
10in
10in
1in
MINIMUM 10 SQ IN (65 SQ CM)
OF VENTILATION REQUIRED
MINIMUM 20 SQ IN (130 SQ
CM) OF VENTILATION
REQUIRED.
Back View
propane tank must be secured to the built-in cabinet
inside the cylinder enclosure.
Layout for Non-combustible enclosure
Configuration Example 2: With open cutout bottom
Note:
These illustrations are for reference purpose only. Actual built-in cabinets and
installation may differ.
Note:
Avoid abrasion of hose against the
opening. It is recommended to use a rubber
grommet at the opening.
Rubber grommet
Note:
The cabinet should not be designed
in a way that a spare cylinder can be stored
inside the enclosure.
The opening of propane enclosure is limited to
the dimensions below:
Width (W1) must be less than 23.5”.
Height (H1) must be less than 18.5”.
W1
H1
