New Rock Technologies WROC2000, User Manual

Page: 41 / 71

41
4. After registration succeeds, the call button turns green.
Note:
If you use a third party softphone, you need to configure IP extension number, password and the
IP address of WROC2000. For details, see Notes in section
Using IP Phone
Call Barring
The WROC2000 supports the following five outgoing call barring modes .

Intercom: Only internal calls are allowed.

Local: Internal and local calls are allowed.

Domestic: Internal, local, and domestic long-distance calls are allowed.

International : All calls are allowed.

None : Outgoing calls are prohibited by prompting a busy tone.
Modifying the Call Barring Mode of an Analog Extension
To modify the call barring mode of an analog extension, perform the following steps:
1. Click Voice on the home page.
2. Navigate to Extension> Analog extension>PHONE , and select a call barring mode from Call
barring .
3. Click Save .
Modifying the Call Barring Mode of an IP Extension
To modify the call barring mode of an IP extension, perform the following steps:
1. Click Voice on the home page.
2. Navigate to Extension > IP extension .
3. In Current account , click .
4. In Add/Modify IP extension , select a call barring mode from Call barring .
5. Click Modify .
Outbound Call Transfer
This feature enables the receptionist to transfer incoming calls to a phone in the PSTN.