NRP1002/P IP Phone User Manual
www.newrocktech.com 42/68
answered it
Subscribe For Voice Message
Enable the device to subscribe a voice message waiting
notification, if enabled, the device will receive notification from
the server if there is voice message waiting on the server
Voice Message Number
Set the number for retrieving voice message
Voice Message Subscribe Period
Set the interval of voice message notification subscription
Enable DND
Enable Do-Not-Disturb, any incoming call to this line will be
rejected automatically
Blocking Anonymous Call
Reject any incoming call without presenting caller ID
Use 182 Response for Call
waiting
Set the device to use 182 response code at call waiting
response
Anonymous Call Standard
Set the standard to be used for anonymous
Dial Without Registered
Set call out by proxy without registration
User Agent
Set the user agent, the default is Model with Software Version.
Use Quote in Display Name
Whether to add quote in display name
Ring Type
Set the ring tone type for the line
Conference Type
Set the type of call conference, Local=set up call conference by
the device itself, maximum supports two remote parties,
Server=set up call conference by dialing to a conference room
on the server
Server Conference Number
Set the conference room number when conference type is set
to be Server
Transfer Timeout
Set the timeout of call transfer process
Enable Long Contact
Allow more parameters in contact field per RFC 3840
Enable Missed Call Log
If enabled, the phone will save missed calls into the call history
record.
Response Single Codec
If setting enabled, the device will use single codec in response
to an incoming call request
Use Feature Code
When this setting is enabled, the features in this section will not
be handled by the device itself but by the server instead. In
order to control the enabling of the features, the device will
send feature code to the server by dialing the number specified
in each feature code field.
Enable DND
Set the feature code to dial to the server
Disable DND
Set the feature code to dial to the server
Enable Call Forward
Unconditional
Set the feature code to dial to the server
Disable Call Forward
Unconditional
Set the feature code to dial to the server
Enable Call Forward on Busy
Set the feature code to dial to the server
