NRP1000 Series IP Phone User Manual
New Rock Technologies, Inc. 5-23
Table 5-14 IAX2 parameters setting
Name Description
Status
Indicates whether the phone has been registered to the IAX2 server. The value can be
Applied
or
Unapplied
.
Server Address
Specifies the IP address of the IAX2 server. The value can be in the form of domain
name.
Server Port
Specifies the port number of the IAX2 server.
Account
Specifies the account name for logging in to the IAX2 server.
Password
Specifies the password for logging in to the IAX2 server.
Phone Number
Specifies the phone number assigned.
Local Port
Set your local sport, the default is 4569.
Voice Mail
Number
Specify the voice mail’s number.
Voice Mail Text
Specifies the name of a voice mail.
Echo Test
Number
Enables the IAX2 server to support echo test, a function to check whether the
communication initiated by a terminal to a selected platform is normal. If the value is
set to Enabled, the echo test number is in text format, the phone uses the echo test
number to replace the echo test text..
Echo Test Text
Specifies the name of the echo test text.
Refresh Time
Sets the interval for refreshing the registration information of the IAX2 server. The
value can be an integer ranging from 60 to 3600.
Enable
Registration
Enables the phone to register to the IAX2 server or disables the phone from registering
to the IAX2 server.
Enable G.729AB
Enables the phone to support G.729.
5.5.3 Stun
In this Web page, you can configure SIP STUN.
With a STUN server, the phone in private network can obtain the type of NAT and the NAT mapping
IP and port of SIP. The phone might register itself to the SIP server with global IP address and port to
enable the device to make a call and be called in private network.
