NRP1000 Series IP Phone User Manual
www.newrocktech.com 3-1
3
Phone Function
3.1 Basic Function
3.1.1 Making a Call
Call Device
You can make a phone call via the following modes:
If you pick up the handset, the icon
will display in the upper left corner of the screen.
If you press the
Speaker
key, the icon
will display in the upper left corner of the screen.
If you press the
Headset
key in the scenario where a headset is connected, the icon
will
display in the upper left corner of the screen.
You can dial the number first, and choose a call mode as needed.
Call Mode
Speed Dial
In standby mode, you simply enter your number to dial and press [#] or press [Redial] to make a call
Hook dialing
Pick up the handset and hear dial tone, you can start dialing. After entering the destination number,
press the [#] key, NRP1000 can immediately start connecting with each other. When you hear the
beep ... beep ... long beep, the other phone started ringing, until the other party pick up the handset or
use the speakerphone (time of the call is displayed on the screen), you can start talking. When the call is
completed, replace the handset hang up the call.
Hands-free Dialing
Press the speakerphone key and hear a dial tone, you can start dialing. After entering the destination
number, press the [#] key, NRP1000 can immediately start connecting with each other. When you hear
the beep ... beep ... long beep, the other phone started ringing, until the other party pick up the handset
or use the speakerphone when you can start talking. When the call is finished, press the Speakerphone
key to end the call.
Using the Redial button
If you try to call over the telephone, you can press [Redial] key to call a recently dialed number one.
Note that you restart the phone, the system will clear the call log, dial [Redial] key at this time will be
invalid.
3.1.2 Answering a Call
Methods for answering an incoming call are as follows
:
If there are no other calls on the line, you can pick up the handset or press the
Speaker
or
Answer