New lift ADM 3, Manual

Page: 21 / 24

ADM-XK land call module
Terminalassignmentandconfiguration
ADMmanual 17
6.3.4 Floor and door side assignment
Identical to ADM-XF. See „3.3.4 Floor and door side assignment“ auf Seite 13.
6.3.5 LED
LED Colour State Description
LD1 yellow flashes briefly ADM ready
flashing or permanently illuminated hardware error
The yellow service LED signals the readiness of the ADM-XK by a short flash when the power supply is swit-
ched on. A blinking LED, however, indicates an error.
6.3.6 Configuration of the key switch inputs
Two freely configurable functions can be programmed for the key switches. Here the input function for terminal
X1.8 is configured via I/O port #70 and the input function for terminal X1.4 via I/O port #71 of the FST.
It should be noted that only floor-independent functions can be programmed, because the selected input
function is the same for all floors. The programming of (exclusively) free inputs is done via the FST menu under
Menu / Configuration / I/O Configuration / I/O ports / RAW = XXXXXXXX
More detailed information on this topic can be found in the FST manual in chapter „.
Example
Xn.8 = Remote shutdown (n = 1 – 14) → I/O Ports [70] RAW = 0000001A
Xn.9 = Fire recall floor 0 (n = 1 – 14) → I/O Ports [71] RAW = 00000012