New lift ADM 3, Manual

Page: 19 / 24

ADM-XK land call module
Technicaldata
ADMmanual 15
6 ADM-XK land call module
The ADM-XK controls the connected landing call panels via the control cables connected to X1. The ADM-XK
is installed once in the control system and, from there, controls the buttons and directional displays for up to 14
floors (2 buttons).
6.1 Technical data
Description Value
Supply voltage 24 V DC ±10%
Typical power consumption 50 mA
Outputs Short circuit-proof
Length x height x depth 72 x 144 x 15 mm
Temperature range: Storage & transport / operation -20 – +70 °C / ±0 – +60 °C
Relative humidity: Storage & transport / operation
(non-condensing)
+5 – +95 % / +15 – +85 %
X1
X21
X22
J0
J1
J2
J3
J4
K1
K3
K2
72
6
144
72
7
137
Fig. 5.1: ADM-XK circuit board marking
6.2 Installation and wiring
The ADM-XK can be installed in the control cabinet and fixed in place there with threaded bolts. As an alter-
native, it can also be mounted in a suitable housing outside the control cabinet. The wiring of the landing call
panels is carried out locally during on-site installation.
The ADM-XK is connected to the shaft bus (FST X5 and X6) and supplied via the FST X4 (X4.1: +24 V, X4.2:
GND).