New lift ADM 3, Manual

Page: 13 / 24

ADM-M land call modul
Terminalassignmentandconfiguration
ADMmanual 9
4.2 Terminal assignment and configuration
4.2.1 Bus connection X1, X2
ADM-M X1 / X2 Cable colour Designation
1 black RS-485 LON bus A
2 white RS-485 LON bus B
3 red +24 V
4 violet GND or 0V
4.2.2 Jumper
There are two contact areas on the ADM-M module instead of Jumper J1. If necessary, gently press these con-
tact area with a screwdriver.
4.2.3 Terminal strip
ADM-M X6 Standard Programming
X6.11 GND
X6.12 Key switch 1:
fire recall, fire recall selective, fire recall
reset, landing prio, landing prio selective,
landing prio super, remote shutdown,
remote shutdown selective, smoke alarm,
soft switch
X6.13 Key switch 2:
fire recall, fire recall selective, fire recall
reset, landing prio, landing prio selective,
landing prio super, remote shutdown,
remote shutdown selective, smoke alarm,
soft switch
X6.14 acoustic click
X6.15 +24V
X6.16 direction DOWN
X6.17 direction UP
X6.18 Key switch 3
X6.19 currently without function
X6.20 GND
X6.21 currently without function