New Holland P2080, Service Manual

Page: 40 / 41

INTRODUCTION
GRADE 2* GRADE 5, 5.1 or 5.2 GRADE 8 or 8.2 GRADE L9 (Alloy)
SIZE Dry ** Lubricated ** Dry** Lubricated ** Dry** Lubricated ** Head Nut
237 Nm 176 Nm 353 Nm 271 Nm 515 Nm 380 Nm 359 Nm 393 Nm
3/4 UNF
175 lb ft 130 lb ft 260 lb ft 200 lb ft 380 lb ft 280 lb ft 265 lb ft 290 lb ft
271 Nm 190 Nm 470 Nm 298 Nm 570 Nm 420 Nm 447 Nm 481 Nm 3/4 UNC
200 lb ft 140 lb ft 300 lb ft 220 lb ft 420 lb ft 310 lb ft 330 lb ft 355 lb ft
231 Nm 170 Nm 583 Nm 434 Nm 814 Nm 610 Nm 644 Nm 685 Nm 7/8 UNF
170 lb ft 125 lb ft 430 lb ft 320 lb ft 600 lb ft 450 lb ft 475 lb ft 505 lb ft
244 Nm 190 Nm 637 Nm 475 Nm 909 Nm 678 Nm 705 Nm 793 Nm 7/8 UNC
180 lb ft 140 lb ft 470 lb ft 350 lb ft 670 lb ft 500 lb ft 520 lb ft 585 lb ft
339 Nm 258 Nm 868 Nm 651 Nm 1234 Nm 922 Nm 746 Nm 1051 Nm 1 UNF
250 lb ft 190 lb ft 640 lb ft 480 lb ft 910 lb ft 680 lb ft 550 lb ft 775 lb ft
380 Nm 285 Nm 976 Nm 732 Nm 1383 Nm 1031 Nm 949 Nm 1220 Nm 1 UNC
280 lb ft 210 lb ft 720 lb ft 540 lb ft 1020 lb ft 760 lb ft 700 lb ft 900 lb ft
475 Nm 366 Nm 1071 Nm 800 Nm 1749 Nm 1315 Nm 1390 Nm 1559 Nm 1-1/8 UNF
350 lb ft 270 lb ft 790 lb ft 590 lb ft 1290 lb ft 970 lb ft 1025 lb ft 1150 lb ft
542 Nm 407 Nm 1207 Nm 909 Nm 1953 Nm 1464 Nm 1559 Nm 1797 Nm 1-1/8 UNC
400 lb ft 300 lb ft 890 lb ft 670 lb ft 1440 lb ft 1080 lb ft 1150 lb ft 1325 lb ft
678 Nm 515 Nm 1519 Nm 1139 Nm 2468 Nm 1844 Nm 1898 Nm 2170 Nm
1-1/4 UNF
500 lb ft 380 lb ft 1120 lb ft 840 lb ft 1820 lb ft 1360 lb ft 1400 lb ft 1600 lb ft
746 Nm 570 Nm 1681 Nm 1261 Nm 2726 Nm 2048 Nm 2170 Nm 2373 Nm 1-1/4 UNC
550 lb ft 420 lb ft 1240 lb ft 930 lb ft 2010 lb ft 1510 lb ft 1600 lb ft 1750 lb ft
1180 Nm 881 Nm 2644 Nm 1980 Nm 4285 Nm 3214 Nm 3932 Nm 4407 Nm 1-1/2 UNF
870 lb ft 650 lb ft 1951 lb ft 1460 lb ft 3160 lb ft 2370 lb ft 2900 lb ft 3250 lb ft
1329 Nm 990 Nm 2983 Nm 2224 Nm 4827 Nm 3621 Nm 4475 Nm 4949 Nm 1-1/2 UNC
980 lb ft 730 lb ft 2200 lb ft 1640 lb ft 3560 lb ft 2670 lb ft 3300 lb ft 3650 lb ft
NOTICE: DO NOT use these values if a different torque value or tightening procedure is given for a specific applica-
tion. Torque values listed are for general use only. Check tightness of fasteners periodically. Shear bolts are designed
to fail under predetermined loads. Always replace shear bolts with identical grade bolts.
NOTES
• *Grade 2 applies for hex caps (not hex bolts) up to
152 mm ( 6 in ) long. Grade 1 applies for hex cap screws over
152 mm ( 6 in ) long, and for all other types of bolts and screws of any length.
• **"Lubricated" means coated with a lubricant such as engine oil, or fasteners with phosphate and oil coatings. "Dry"
means plain or zinc plated without any lubrication.
47648338 18/06/2014
36