New Holland P2080, Service Manual

Page: 39 / 41

INTRODUCTION
Torque
BOLT TORQUE INFORMATION
1. Fasteners should be replaced with the same or higher grade fasteners. If higher grade fasteners are used, these
should only be tightened to the strength of the original.
2. Make sure the fastener's threads are clean and that thread engagement is started. This will prevent them from
failing when being tightened.
3. Tighten plastic insert or crimped steel-type lock nuts to approximately 50 % of the dry torque, applied to the nut,
not to the bolt head. Tighten toothed or serrated-type lock nuts to the full torque value.
4. The L9 (Alloy) fasteners torque values are for a bolt, nut, and two washers. When using L9 (Alloy) fasteners, do
not use the values in this table for tapped holes.
GRADE
1 or 2
5
5.1 5.2 8 8.2 L9 (Alloy)
SAE Markings
for Bolts and
Cap Screws
2 5 8 L9 (Alloy)
SAE Markings
for Hex Nuts
GRADE 2* GRADE 5, 5.1 or 5.2 GRADE 8 or 8.2 GRADE L9 (Alloy)
SIZE Dry ** Lubricated ** Dry** Lubricated ** Dry** Lubricated ** Head Nut
7.5 Nm 5.7 Nm 10.8 Nm 8.5 Nm 16.3 Nm 12.2 Nm 13.6 Nm 14.9 Nm 1/4 UNF
5.5 lb ft 4.2 lb ft 8 lb ft 6.3 lb ft 12 lb ft 9 lb ft 10 lb ft 11 lb ft
8.5 Nm 6.4 Nm 13.6 Nm 9.8 Nm 19 Nm 13.6 Nm 16.3 Nm 17.6 Nm
1/4 UNC
6.3 lb ft 4.7 lb ft 10 lb ft 7.2 lb ft 14 lb ft 10 lb ft 12 lb ft 13 lb ft
15 Nm 11 Nm 23 Nm 18 Nm 33 Nm 24 Nm 26 Nm 28 28 Nm 5/16 UNF
11 lb ft 8 lb ft 17 lb ft 13 lb ft 24 lb ft 18 lb ft 19 lb ft 21 lb ft
16 Nm 12 Nm 26 Nm 19 Nm 37 Nm 27 Nm 27 Nm 31 Nm 5/16 UNC
12 lb ft 9 lb ft 19 lb ft 14 lb ft 27 lb ft 20 lb ft 20 lb ft 23 lb ft
27 Nm 20 Nm 41 Nm 31 Nm 61 Nm 47 Nm 41 Nm 45 Nm 3/8 UNF
20 lb ft 15 lb ft 30 lb ft 23 lb ft 45 lb ft 35 lb ft 30 lb ft 33 lb ft
31 Nm 23 Nm 47 Nm 34 Nm 68 Nm 47 Nm 47 Nm 52 Nm 3/8 UNC
23 lb ft 17 lb ft 35 lb ft 25 lb ft 50 lb ft 35 lb ft 35 lb ft 38 lb ft
43 Nm 33 Nm 68 Nm 47 Nm 95 Nm 68 Nm 75 Nm 81 Nm 7/16 UNF
32 lb ft 24 lb ft 50 lb ft 35 lb ft 70 lb ft 50 lb ft 55 lb ft 60 lb ft
49 Nm 37 Nm 75 Nm 54 Nm 108 Nm 81 Nm 81 Nm 88 Nm 7/16 UNC
36 lb ft 27 lb ft 55 lb ft 40 lb ft 80 lb ft 60 lb ft 60 lb ft 65 lb ft
68 Nm 47 Nm 102 Nm 75 Nm 149 Nm 108 Nm 115 Nm 129 Nm 1/2 UNF
50 lb ft 35 lb ft 75 lb ft 55 lb ft 110 lb ft 80 lb ft 85 lb ft 95 lb ft
75 Nm 54 Nm 115 Nm 88 Nm 163 Nm 122 Nm 129 Nm 142 Nm
1/2 UNC
55 lb ft 40 lb ft 85 lb ft 65 lb ft 120 lb ft 90 lb ft 95 lb ft 105 lb ft
95 Nm 75 Nm 149 Nm 108 Nm 203 Nm 149 Nm 163 Nm 190 Nm 9/16 UNF
70 lb ft 55 lb ft 110 lb ft 80 lb ft 150 lb ft 110 lb ft 120 lb ft 140 lb ft
108 Nm 81 Nm 163 Nm 122 Nm 231 Nm 176 Nm 183 Nm 203 Nm 9/16 UNC
80 lb ft 60 lb ft 120 lb ft 90 lb ft 170 lb ft 130 lb ft 135 lb ft 150 lb ft
136 Nm 102 Nm 203 Nm 149 Nm 285 Nm 217 Nm 231 Nm 251 Nm 5/8 UNF
100 lb ft 75 lb ft 150 lb ft 110 lb ft 210 lb ft 160 lb ft 170 lb ft 185 lb ft
149 Nm 115 Nm 231 Nm 176 Nm 325 Nm 244 Nm 258 Nm 278 Nm 5/8 UNC
110 lb ft 85 lb ft 170 lb ft 130 lb ft 240 lb ft 180 lb ft 190 lb ft 205 lb ft
47648338 18/06/2014
35