New Holland 555912001, Service Manual

Page: 43 / 81

INTRODUCTION
Alarm
Alarm
description
Alarm explanation
Prior-
ity
Activation Time Resetting Time
A1111
Reel speed too
low
The reel is running
too slow. Increase
speed OR the
“header reel flow
limit” setting
White
Reel speed <
minimum
5 s
Reel speed >
minimum
5 s
A1112
Reel speed too
high
The reel is running
too fast. Reduce
speed OR the
“header reel flow
limit” setting
White
Reel speed >
maximum
5 s
Reel speed <
maximum
5 s
A1113
Feed rolls not
calibrated
Feed roll calibration
needs to be
completed before
ActiveLOC™ will
activate
White
Feed roll calibration
not done before
AND
ActiveLOC™
enabled
5 s Time-out 0 s
A1114
ActiveLOC™
disabled
ActiveLOC™
disabled due to an
invalid signal on
the moisture sensor
OR feed roll speed
sensor
White
Invalid value on the
moisture sensor
OR
invalid value on
the feed roll speed
sensor during
automatic Length
Of Cut (LOC)
6 s Time-out 0 s
A1115
Header (hdr)
adjust not
allowed Auto cut width is on.
Change of header
width is not allowed.
Yellow
Auto cut width is
active AND (the
header usage
increase OR
decrease button
is pressed).
0 s Time-out 5 s
A1200
Stone not in
home position
Start “sharpening”
procedure to bring
the stone home
Yellow
Sharpening not
ongoing AND
engaging main clutch
AND stone not in
home position
0 s
Sharpening
ongoing OR main
clutch Off OR
stone in home
position
0 s
A1201 Brake fluid low Add brake fluid White Level switch low 5 s
Level switch high
5 s
A1202
Cutter Belt
Slipping
The main belt is
slipping. Check belt
tension
Yellow
3 s After main
clutch OR reverse
clutch engaged AND
slippage >
20% .
1 s
Main clutch OR
reverse clutch
not engaged for
3 s OR slippage
< 20% .
1 s
A1203 Stone door open
Start “stone door
close” procedure to
close the door
Yellow
Sharpening not
ongoing AND
engaging main clutch
AND stone door open
0 s
Sharpening
ongoing OR
main clutch Off
OR stone door
closed
0 s
A1204
Operation not
possible in road
mode
Grass pickup wheels
can only be moved in
field mode. Set the
“safety-on-the-road
button” to field
White
Grass pickup wheels
valve actuated in
road mode
0 s
Grass pickup
wheels valve not
actuated OR field
mode
0 s
A1205
Header wheel
not attached Header safety lock
open
Yellow
Header support
wheel switch open
3 s
Header support
wheel switch
closed
1 s
A1206 Version conflict
EEPROM version
conflict
Yellow
Control module
communication not
executed
30 s
Control module
communication
executed
0 s
48142788 28/04/2017
34