NEW BRUNSWICK SCIENTIFIC innova 3100, Manual To Operations

Page: 47 / 59

35
Innova 3100 Š M1231-0050 User’s Guide
7. Reinstall one ¼ inch screw and the temperature sensor ground lug at the corner
near J103. Reinstall the two remaining ¼ inch screws and nylon flat washers.
8. Reconnect the harness wiring to connectors J101, J102, J103 and J104. Make sure
that each connector is properly positioned (keys mate and no pins remain
exposed).
9. Replace the front panel and secure with the five screws.
10. Connect the power cord to the rear of the shaker.
5.13 Service Parts List
NBS Part
Number
Description Quantity
P0380-3320 0.125A Fuse (Low Voltage) 1
P0380-3410 1.0A Fuse (Selector Switch) 1
P0420-1610 10VA Transformer 1
M1190-5300 80VA Transformer 1
P0320-0350 2100uF Capacitor 1
P0460-4091 Diode Bridge 1
P0360-4040 130V Varistor 2
M1195-4000 Medium Motor Assembly 1
M1190-9940 Main Control P.C.B. 1
M1192-7000 Temp. Control P.C.B. 1
M1190-5000 Membrane Sw. Panel 1
P0400-0980 Voltage Selector Switch 1
P0400-4330 10A Circuit Breaker 1
P0400-3011 10A Solid State Relay 1
P0400-2751 Relay 1
P0620-1370 500W Heater 2
M1195-3020 Float Switch Assembly 1
P0220-0055 Solenoid Valve 1
M1195-8000 RTD Assembly 1
P0460-2090 Snubber-Quencharc 1
P0720-2024 Power Cord 120V 15A 1
P0720-2021 Power Cord 220V 1
M1190-6340 Bearing Assembly 3
P0180-0101 Bearing, Shielded (6 Lower Hsg., 2 Motor) 8
P0700-5302 Belt 1
M1231-6330 Bearing Housing Assembly 1
M1195-9420 Tank Gasket 1