39
Save Profile
Save profile is the second option from within the Profile Options
Set all applicable settings before saving a profile.
It is useful to press the new game key to clear the board before making all of the options changes desired prior to saving a profile. If
you don’t blank the board, your profile will be saved with time and score that will be recalled every time the new game key is pressed.
This can be useful if you want the time to be set to 8:00 in basketball for example, or if you prefer the fouls to be ‘0’ by default instead
of <blank>.
1.
Upon entry into the Profile Options; Press
until the MPC-7X2 displays
2.
Press
the MPC-7X2 will display
a.
The profile number here will be the last profile loaded or saved
3.
If the displayed profile is the profile required then press
4.
If the profile displaying is not the required profile then enter the two digit number of the
profile required.
a.
If it is a single digit enter the number and press YES to load
The MPC-7X2 will then begin the process of loading a profile.
The MPC-7X2 beeper will sound while saving.
Mistakes in a saved profile
If a mistake was made in the saved profile’s settings simply:
1.
Load the profile in question
2.
Change the setting
3.
Save the profile again
Default Lock
Default Lock is the third option within the Profile Options. When enabled, the control will prevent the user from overwriting the
default profile created at the factory. The following are the default profile numbers for each sport:
Sport
Default Profile ##
Soccer
88
Football
89
Track
90
Baseball / Softball
91
Lacrosse
92
Basketball
93
Volleyball
94
Wrestling
95
Hockey / Field Hockey
96
To preserve the factory defaults and retain the ability to return the control back to a known state avoid overwriting the factory default
profile numbers.
1.
Upon entry into the Profile Options; Press
until the MPC-7X2 displays
2.
Press
to turn the Default Lock off
a.
Default Lock automatically turns on each time the control is powered on
b.
An asterisk indicates that default lock is turned on
Backup / Restore
Used at the factory to output the contents of the profile / wireless data
Profile(##):## ◄
Save Profile
Default Lock*
