Spate cleaner TANKO-SF
6/63
Translation of the original Operating / Installation Instructions 2016/09 Rev.1
2 Safety
2.1
Intended Use
DANGER
Risk of injuries from fire/explosion when using the device in an explosive atmosphere.
Use of the device in an Ex area (potentially explosive atmosphere) is PROHIBITED.
There is a risk of death or severe physical injuries.
Adhere to the type plate of the device (see
section 2.5.2 Type
) and the respective
operating instructions
WARNING
Risk of hazardous situations caused by use going beyond intended use and/or other
types of use of the device!
There is a risk of death or severe physical injuries.
Only use the device for the intended use.
–
Only ever use the device in accordance with the specifications contained in these
instructions and the specifications on the device’s type plate.
–
All the specifications in these instructions must be adhered to at all times.
–
Always keep the operating instructions at the location where the device is used.
–
Keep all signs on the device in legible condition.
–
Only use original spare parts.
Modifications or conversions to the device are NOT permitted.
WARNING
Danger from the incorrect use of materials/agents!
The materials/agents to be used for the intended operation of the device are procured
and utilized by the operating company for the device.
If unsuitable materials or agents are selected, strong chemical reactions could lead to
fatal injury or (severe) physical injuries.
The proper selection and treatment of these materials/agents is solely the
responsibility of the operating company.
When selecting the materials/agents, make sure that the permitted technical
parameters of the device are NOT exceeded.
The cleaning agents and media must be approved for all of the materials of the device
(e.g. washers, bushings) and for the substances in the container to be cleaned which
come into contact with them.
Adhere to the specified chemical limitations for use in the material data sheets.
Adhere to the safety data sheets supplied by the manufacturers of the materials and
media, in particular for hazardous substances:
–
Comply with the hazard and disposal instructions.
–
Set out protective measures and compile operating instructions for hazardous
substances.
–
This also applies to hazardous substances that may arise during work processes.