3.1 Positioning
The side and rear panels of the unit have to be positioned to enable the subsequent electrical
installation and maintenance of the unit. The appliances are neither suitable for integrating into
a kitchen unit nor for mounting in line. If the unit has to be set-up close to walls, partition
panels, kitchen cabinets, decorative edgings, etc. you have to make sure that these have not
been made from inflammable material. Otherwise they have to be insulated with a heat-
resistant and non-inflammable covering.. Please adhere to the fire prevention regulations.
3.2 Instructions
Remove carefully the protective foil from the outside panels in order to avoid glue residues
remaining on the unit. Eventual glue residues may be removed by using an appropriate thinner.
The installation of units which are not ready to be plugged into the socket as well as the
maintenance of units should only be carried out by a authorized electrician.
3.3 Electrical connection
The connection to the electrical power supply has to be carried-out according to the latest
regulations. Before connecting the unit, make sure that the voltage and the frequency of the
unit correspond to the indications on the data plate. Between the unit and the power supply a
switch disconnecting all poles has to be fitted having a contact opening distance of min. 3 mm.
The switch has to be accessible after installation (e.g. a magnetic disconnecting switch)
During operation the deviation of the supply voltage from the nominal voltage should not
/- 10%.
The unit has to be connected to the earth wire of the electrical supply.
3.4 Functional Test
Switch on the unit according to our following operating instructions.
Explain to the operator how to set the unit into work as well as its function by using our
operating instructions.
3.5 Maintenance
Before carrying out any maintenance work, make sure that the unit has been disconnected from
the power supply and wait until the unit has cooled down.
After removing the base plate, all components of this appliance are accessible for maintenance
work.
We recommend to let the unit be inspected regularly by a specialist (at least once a year).
II. Operating Instructions
Important:
Never use a water jet for cleaning the unit.
The unit has been designed for professional use and should only be operated by qualified
personnel.
1. Instructions for the user
Important:
Please study carefully our operating instructions as they give you important advices regarding
to your safety during installation, operation and maintenance. Pass on these operating
