NTI ENVIROMUX SENSOR INSTALLATION
2
INTRODUCTION
Many different sensors can be connected to the ENVIROMUX Series Enterprise Environment Monitoring Systems. Series models
include E-16D/5D/2D, E-MINI-LXO and E-MICRO-T(RHP). A complete listing of available sensors and accessories can be found
at
http://www.networktechinc.com/environment-monitor-16d.html
for the E-16D,
http://www.networktechinc.com/environment-monitor-5d.html
for the E-5D,
http://www.networktechinc.com/environment-monitor-2d.html
for the E-2D, and
http://www.networktechinc.com/environment-
monitoring.html
for the E-MINI-LXO.
http://www.networktechinc.com/environment-monitor-micro.html
for the E-MICRO-T(RHP)
Manuals for each Environment Monitoring System covering installation and configuration for all features can also be found at
these websites. This manual is only provided to instruct how to connect the various sensors to these systems.
CONNECT SENSORS TO E-MINI-LXO /-MICRO-T(RHP)
E-T or TRHM-E7
For measuring temperature and humidity, the E-MINI-LXO and E-MICRO-T(RHP) uses the E-T-E7 (temperature only), E-TRHM-
E7 (combination temperature and humidity sensor). For high-temperature environments, E-MINI-IND uses the E-T-IND-E7 High
Temperature Sensor.
1. Connect either of the temperature / humidity sensors to an available port on the E-MINI-LXO. Plug the RJ45 connector
to either of the two ports marked "TEMPERATURE/HUMIDITY". The E-T/TRHM-E7 sensors can be secured anywhere
that the temperature and/or relative humidity need to be sensed.
Note: The E-TRHM-E7 sensor will work with the E-MINI-LXO provided firmware version 2.3 or later is installed, and with
the E-MICRO provided firmware version 1.3 or later is installed.
2. Power-cycle the E-MINI-LXO after the sensor(s) have been plugged-in.
Note: Mounting the sensor in the path of a fan or on a heated surface may affect the accuracy of the sensor’s readings
.
Note: For best results, use the E-T-IND-E7 with model E-MINI-IND.
Figure 1- Connect sensors to E-MINI-LXO
To extend a sensor cable (up
to 500 feet long) requires E-
MINI-LXO firmware version 2.0
or later.