4
4.3 Automatic Zone Registration (enrollment)
Z307 is a zone device in the security system. Soon after the network join, the next step is to enroll itself into a CIE
(Control and Indicating Equipment) –the security system device, to validate Z307 zone alarm feature. The
registration will take place automatically soon after the device joined to the network.
*notes: a CIE security system will normally embedded within a device (i.e. a Netvox Z201B coordinator) or it
could be a stand-alone CIE device.
Observing security system (CIE) registration:
To ensure enrollment is successful or not, simply read the indicator light flashes.
(1) Right after the network join, Z307 will send an enrollment request to the air. If there is CIE and it has enrolled
the red indicator will flash 6 times. The red indicator light flashes 4 times if enrollment failed.
(2) For any reason that Z307 has failed being registered, when fall even happen at anytime Z307 will initiates the
enrollment process. The indicator will flash the same as that described in (1).
4.4 Emergency and Position System
How is Z307 triggered
Z307 can be trigger alarm through emergency button and body falling.
Emergency
At the event of emergency, the user may press the emergency button once, the device vibrates once while it sends
alarm signal to the security system for strobe light or siren alert.
Fall Detect
When the wearer falls, the device vibrates twice indicating fall detected. The device starts 15 seconds countdown
before it sends fall detect alarm signal to the security system for strobe light or siren alert. The user has 15 seconds
to cancel the alarm signal to be sent. To cancel the alarm, hold press the emergency button for 2 seconds the alarm
will be canceled and will not be sent.
The user may trigger the emergency alarm at any time as they wish. Refer to Emergency in the above.
As described in Automatic Zone Registration section above, Z307 needs CIE to report of fall event. In case that
Z307 has not been registered to any CIE device, Z306 will attempt to register itself to a CIE device then report its
alarm message at the time of emergency and fall event.
Position Detect
Equipment in the alarm at the same time will also report their current location information, in order for more
quickly rescue.
Note: The device must be worn on the user's waist, from top to bottom clip on the belt (as far as possible
perpendicular to the ground). At the same time, the device has a built-in sensitive sensor. When moving the device,
please use it gently to avoid false triggers.
