9
6. Netvox APP Control
1 After adding Z307 into Netvox system, device information appears on the device management interface of the
APP. As shown in Figure 5.1 below, there is one EP information. Click the icon to enter the state of Figure 5.2.
Fig. 5.1
Fig. 5.2
2. Click the red box in Figure 5.2 above the settings section, configure whether to open the alarm sound. Click to
enter the configuration shown in Figure 5.3. Click the red box in the lower right corner of Figure 5.2 section, then
enter Figure 5.4, shows the basic information of the device.
Fig. 5.3 Fig. 5.4
