NetUP Streamer HDMI 1x v2. User manual
8
CHAPTER 3 Devices Operations and Management
Device is controlled and managed through the key board and LCD display.
LCD Display –
It presents the selected menu and the parameter settings. The backlight in the display is on when the power
is applied.
LED –
These lights indicate the working status
⚫
Power: It lights on when the power supply is connected.
⚫
Alarm: It lights on when the there is error, such as the signal source loss.
⚫
Lock: It lights on when the signal source connected and goes off when the signal lose.
⚫
Left/Right/Up/Down buttons – Use these buttons to turn the screen pages, shift the target items by moving the
triangle, or change the parameter settings in the program mode.
⚫
Enter –
Use this button to enter a submenu or save a new setting after adjustment; press it to start adjusting the value
of certain items when the corresponding underline flash with Up and Down buttons;
⚫
RF Level
-16.0dBm
RF Level
-16.0dBm
RF Level
-16.0dBm
RF Level
-17.0dBm
Enter
►
►
► ►
⚫
Press it to activate the hidden selections and change the setting with Up and Down (or Left and Right) buttons.
⚫
Audio Bit rate
128
Audio Bit rate
*128
Audio Bit rate
►
128
Audio Bit rate
►
192
Enter
► ►
Enter
⚫
Menu –
Press this button to step back
⚫
Lock –
Locking the screen / cancelling the lock state, and entering the main menu after the initialization of the device.
After pressing lock key, the system will question the users to save present setting or not. If not, the LCD will display the
current configuration state.
⚫
When the power is connected, the LCD will start to initialize the program. The LCD menu goes as below chart.
