NetUP Streamer HDMI 1x v2. User manual
13
Chapter 5 Operations of Web-server
In addition to using front buttons to control the encoder modulator and USB device, users can also perform the same
operation in an easier way with the web Brower in the PC (Personal Computer).
Login
The default IP address of this device is 192.168.0.136. (We can modify the IP through the front panel.)
Connect the PC and the encoder modulator with a net cable, and use ping command to confirm they are on the same
network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 1 to 254 except 252
to avoid IP conflict).
Use web browser to connect the device with PC by inputting the device’s IP address in the browser’s address bar and
press Enter.
It will display the Login Web-interface. Input the Username and Password (Both the default Username and Password are
“admin”.) and then click “LOGIN” to start the device setting.
Operation
Summary:
When we confirm the login, it displays the WELCOME interface as Figure-2 where users can have an overview of the
device’s system information and working status.
Figure-2
Parameters → Input 1:
From the menu on left side of the webpage, clicking “Encoder”, it displays the interface where users can configure the
encoding parameters for the input video/audio. (Figure-3)
User can click any item here to enter
the corresponding interface to check
information or set the parameters.
System information
