NetUP Streamer HDMI 1x v2. User manual
16
File Name: Users can enter this menu to edit name for the *.ts files to be recorded. For example, if users name it “Record-
”, it will give name to the saved *.ts files “Record-001.ts”, “Record-002.ts” “Record-00N.ts”.
File Select: To browse TS files in the USB device.
Play Mode: User can select a play mode for the *.ts files as needed before playing the *.ts file and specify a video under
‘Single file’ / ‘Single loop’ mode and press “Enter” button to start play. While under ‘Play all’ / ‘Loop all’ mode, it
automatically plays files from first to end.
Auto Record/Play: When the auto mode is enabled, the device will automatically record/play after USB connected.
Otherwise user needs to click “Start record/Play” button to start.
System → NMS:
From the menu on left side of the webpage, clicking “Network”, it displays the interface where users set the network
configuration for the device. (Figure-9)
Figure-9
System → Password:
From the menu on left side of the webpage, clicking “Password”, it will display the screen as Figure-9 where to set the
login account and password for the web NMS. (Figure-10)
Figure-10
System → Configuration:
From the menu on left side of the webpage, clicking “Configuration”, it displays the interface where users can set the
configuration that save/Restors/factory set/backup and load. (Figure-11)
Input this address in
the browser to connect
the device and PC.
