NetUP Streamer HDMI 1x v2. User manual
7
Installations
RISK OF damage to the unit
Mechanically handling the unit may result in damage. Do not connect the unit to the power supply before or during
assembly. Connect the unit as below instructed.
NO HOT PLUG!
1.
Mount and tighten the screws and plugs to secure the unit to the wall. Left
10 cm of free space around from each unit.
2.
Connect the signal input in the respective connectors. The signal source can
be from a surveillance monitor, DVD, set-top box, CCTV and etc.
3.
Optionally, connect the loop-through RF input
coaxial cable.
4.
Connect cable to RF output to STB/TV.
5.
Power supply connection: a) Connect the earth cable; b) Connect the power
plug to the unit mains connector; c) Connect the power plug to the mains
socket.
Cascade Installation
Device unit has 1 TV signal to RF output encoded as Digital TV signal.
Several device units can be cascaded in order to increase the capacity.
The maximum capacity of a series of N units is 1xN incorporated TV
signals. To cascade 2 or more units, connect the RF output of the
preceding unit to the TV input (loop-through) of the next unit (see right
illustration)
2
3
4
5
