6
•
Check that all connected channels are enable by turning the
State
to ON
and that the correct CT types are selected.
•
If monitoring a 3-phase supply then turn 3-phase ON in Channel 1.
•
The
Name
field can be used for the installer to identify what is
connected.
SETTING UP ELECTRICITY CHANNELS
•
The
Type
field is used to select the CT that has
been used in the installation.
•
The terminal blocks shown as blue indicate
the connection pair that correspond to the
channel.
•
Press
Save Channel Configuration
before
exiting and use setup button in the top right
hand corner to return to the Configuration
Menu.
(Typical example of a Single Phase Electricity Configuration)
•
Check that all connected channels are enable by turning the
State
to ON
.
•
The
Type
field has a drop down menu and this will allow you to
choose the correct utility type that is connected to your energy
manager.
•
The
Name
field can be used for the installer to identify what is
connected.
•
The
Pulse Value
field should be set to the corresponding value of
the energy source that you are connecting to. This value may be
indicated on the connected energy source.
•
Press
Save Channel Configuration
before exiting and use setup
button in the top right hand corner to return to the Configuration
Menu.
SETTING UP PULSE INPUT CHANNELS
CONFIGURATION
Following a successful WIFI connection between the Controller and
the Display, the Energy Manger should now be configured to
enable the energy sources that are connected to the meter.
To Setup the system, press the setup icon in the top right
hand corner of the screen.
Press
Channels Configuration
to start configuration of the
channels.
(
Please Note:
M-Bus options are only visible and enabled on M-
Bus capable hardware. 3
rd
party integration menus are only
visible when appropriate hardware is connected.)
If intending to use M-Bus functionality or any 3
rd
party integration, please follow the
instructions in appropriate Appendix first, before returning to the complete the pulse
setup, and the remainder of the commissioning process.