manualshive.com logo in svg

Netopia R910, User Reference Manual

The Netopia R910 User Reference Manual is a comprehensive guide designed to help you maximize the full potential of your device. This manual is available for free download on our website, ensuring easy access and hassle-free assistance whenever you need it.

Share
Download
background image

IP Setup and Network Address Translation   9-59

■

Select 

Service

. A pop-up menu of ser vices and por ts appears.

5.

Select any of the ser vices/por ts and press Return to associate it with the address of a ser ver on your local 
area network. For example, if we select 

www-http 80

, press Return, and type 

10.0.0.2

, the Netopia R910 

redirects any incoming traffic destined for a Web ser ver to address 10.0.0.2.

Some ser vices such as Timbuktu require the expor t of multiple TCP por ts. When you associate Timbuktu 
with a local ser ver (or Timbuktu host) all of the major Timbuktu ser vices are expor ted, i.e., Obser ve, 
Control, Send, and Exchange.

Note:

If the TCP por t of a ser vice you want to use is not listed, you can add it by selecting 

Other...

 on the 

pop-up menu.

                              Add Exported Service
                                          +-Type------Port--+
                                          +-----------------+
         Service...                       | ftp       21    |
                                          | telnet    23    |
                                          | smtp      25    |
         Local Server's IP Address:       | tftp      69    |
                                          | gopher    70    |
                                          | finger    79    |
                                          | www-http  80    |
                                          | pop2      109   |
                                          | pop3      110   |
                                          | snmp      161   |
                                          | timbuktu  407   |
                                          | pptp      1723  |
                                          | irc       6667  |
                                          | Other...        |
                                          +-----------------+

              ADD EXPORT NOW                CANCEL

Summary of Contents for R910


















































































































































































































Reviews:

No comments

Related manuals for R910

D-Link DIR-855L Quick Installation Manual preview
DIR-855L
Brand: D-Link Pages: 28
D-Link DIR-826L Quick Install Manual preview
DIR-826L
Brand: D-Link Pages: 2
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Quick Start Manual preview
DIR-655 - Xtreme N Gigabit Router Wireless
Brand: D-Link Pages: 3
D-Link DIR-605L Technical Support Setup Procedure preview
DIR-605L
Brand: D-Link Pages: 11
D-Link DIR-822 Quick Instillation Manual preview
DIR-822
Brand: D-Link Pages: 35
D-Link DIR-880L Quick Install Manual preview
DIR-880L
Brand: D-Link Pages: 12
D-Link DIR-842 Quick Install Manual preview
DIR-842
Brand: D-Link Pages: 12
D-Link DIR-821 Quick Install Manual preview
DIR-821
Brand: D-Link Pages: 24
D-Link DIR-803 Quick Installation Manual preview
DIR-803
Brand: D-Link Pages: 20
D-Link DIR-815/AC Quick Installation Manual preview
DIR-815/AC
Brand: D-Link Pages: 44
D-Link DIR-830M Quick Installation Manual preview
DIR-830M
Brand: D-Link Pages: 52
D-Link DIR-821 User Manual preview
DIR-821
Brand: D-Link Pages: 103
3Com Server User Manual preview
Server
Brand: 3Com Pages: 48
3Com EtherLink 3C509B Quick Manual preview
EtherLink 3C509B
Brand: 3Com Pages: 8
3Com TokenLink 3C359B Release Note preview
TokenLink 3C359B
Brand: 3Com Pages: 4
3Com TokenLink 3C359B Quick Start Manual preview
TokenLink 3C359B
Brand: 3Com Pages: 8
3Com TokenLink 3C339 Release Note preview
TokenLink 3C339
Brand: 3Com Pages: 2
3Com EtherLink 3C985B-SX Installation And User Manual preview
EtherLink 3C985B-SX
Brand: 3Com Pages: 44

Brands by name

Popular brands

Load more brands