NetModule NetBox NB1310, User Manual

Page: 48 / 110

User Manual NetBox Wireless Routers 26-Apr-2012 48/110
5.1.5.2.2 NAPT on OpenVPN Interface
Port forwarding is the act of forwarding a network port from one network node to another. This tech-
nique can allow an external user to reach a port on a private IP address (inside the LAN) from the outside
(Internet).
Parameter Description
NAPT status Enable or disable NAPT
NAPT needs to be enabled normally (i.e. when using Internet Access). Internet
Service Providers will not route your private LAN Addresses.
Service name: User-defined Name for the NAPT entry
External port: External IP port (mobile interface)
Local host: Check this box to forward traffic to local host service (Webserver, SSH, Telnet)
To forward traffic to an external host in the LAN provide the host address below.
Host address: Host to which the traffic will be forwarded
Internal port: Port to which the traffic will be forwarded
Protocol: Protocol (UDP or TCP) to which this entry applies.
Enabled: Enable (Yes) or disable (No) the entry.