NetModule NetBox NB1310, User Manual

Page: 93 / 110

User Manual NetBox Wireless Routers 26-Apr-2012 93/110
redialAttemptsReach
ed]
dialout.profiles.1.name void username Profile name
dialout.profiles.1.username void username Username
dialout.profiles.1.password void password Password
dialout.profiles.1.phoneNumber void phone number Phone number
dialout.profiles.1.authMethod void [chap, pap] Chap = CHAP
Pap = PAP
dialout.profiles.1.apn void hostname Acess Point Name
dialout.profiles.1.IPHC void [0,1] 0 = off
1 = enable IP header compression
dialout.profiles.1.IPSC void [0,1] 0 = off
1 = enable software compression
dialout.profiles.1.queryDNS=1 void [0,1] 0 = do not query DNS server
1 = query DNS server
dialout.profiles.1.ESCIP void [0,1] 0 = off
1 = enable specific client IP address
dialout.profiles.1.SCAddress void ipaddress Specific client address
dialout.profiles.1.SIM
SIM2 [SIM1,SIM2] SIM used for fallback profile
dialout.profiles.1.ISDN void [0,1] 0 = normal call
1 = is ISDN call
dialout.profiles.1.switchCondition never [never, elpas8h,
elaps16h, elaps24h,
redialAttemptsReach
ed] Condition for profile switch
network.MSS.status 0 [0,1] 0 = disabled
1= enabled
network.MSS.adjustment 1400 [100,1500] Maximum Segment Size
5.2.4.3 Digital I/O
Parameter Default Value Range Description
digitalIO.receiving.tcpPort 2158 [1 .. 65535] TCP Port for monitoring
digitalIO.controlOutPut.output1 off [on,off] State of output 1
digitalIO.controlOutPut.output2 off [on,off] State of output 2
digitalIO.keepOnReboot 1 [0,1] 0 = set values after reboot to
digitalIO.afterReboot.output1
digitalIO.afterReboot.output2
1 = restore values after reboot
digitalIO.afterReboot.output1 off [on,off] State of output 1 after reboot
digitalIO.afterReboot.output2 off [on,off] State of output 2 after reboot
5.2.5 Routing related Parameters
Parameter Default Value Range Description
static_routes.<l>.interface
w
it
h
l
=
[0
..2
0]
void hostname
static_routes.<l>.target void hostname
static_routes.<l>.mask void netmask