NetModule NetBox NB1310 User Manual Download

Page: 63 / 110

User Manual NetBox Wireless Routers

26-Apr-2012

63/110

5.1.7.5

Dynamic DNS

The Dynamic DNS Client of NetBox is completely compatible to the Dynamic Network Services provided
by the organization DynDNS (

www.dyndns.com

5.1.7.5.1

Dynamic DNS Administration

Parameter

Description

Dynamic DNS status:

Enable or disable the Dynamic DNS Client

5.1.7.5.2

Dynamic DNS Configuration

Parameter

Description

Service type:

DynDNS Service according Dynamic Network Services, Inc. (

www.dyndns.com

Please consult www.dyndns.com for more details.

Host name:

URL under which NetBox will be available, e.g. myNetBox.dyndns.org

Server address:

Server IP Address or URL, normally members.dyndns.org

Server port:

TCP Port of the Dynamic DNS Server, e.g. 80 or 8245

User name:

Username

Password:

Password

Support e-mail:

Optional support e-mail address

Summary of Contents for NetBox NB1310















































































































Search results

Summary of Contents for NetBox NB1310

Reviews:

Related manuals for NetBox NB1310

Brands by name

Popular brands

NetModule NetBox NB1310, User Manual

Search results

Summary of Contents for NetBox NB1310

Reviews:

Related manuals for NetBox NB1310

Brands by name

Popular brands