NetModule NB3711 User Manual Download Page 86

Page: 86 / 214

NB3711 User Manual 4.0

Parameter

Firewall Rule Configuration

Destination

The destination address of matching packets, can be any,
local (addressed to the system itself) or specified by ad-
dress/network

Incoming interface

The interface on which matching packets are received

Protocol

The used IP protocol of matching packets (UDP, TCP or
ICMP)

Destination port(s)

The destination port of matching packets, which can be
specified by a single port or a range of ports (only UD-
P/TCP).

The statistics page can be used to figure out if rules have matched any packets and
provides a convenient way to debug your firewall setup.

Summary of Contents for NB3711























































































































































































































Search results

Summary of Contents for NB3711

Reviews:

Related manuals for NB3711

Brands by name

Popular brands

NetModule NB3711, User Manual

Search results

Summary of Contents for NB3711

Reviews:

Related manuals for NB3711

Brands by name

Popular brands