NetModule NB3711, User Manual

Page: 15 / 214

NB3711 User Manual 4.0
3.2. Interfaces
3.2.1. Overview
Label Panel Function
SIM 1 Front SIM 1, it can be assigned dynamically to any modem by
configuration.
SIM 2 Front SIM 2, it can be assigned dynamically to any modem by
configuration.
SIM 3 Front SIM 3, it can be assigned dynamically to any modem by
configuration.
SIM 4 Front SIM 4, it can be assigned dynamically to any modem by
configuration.
USB Front USB 2.0 host port, can be used as USB device server or for
software/configuration updates.
Ethernet 1-5 Front Ethernet switch ports, can be used as LAN or WAN inter-
face.
Front Earth protection connector, connected to the ground of the
power supply V
GND
. If used, connect a yellow-green marked
cable with at least 6 mm
2
copper area. Avoid corrosion and
protect the screws against loosening.
Power Front Power supply (galvanically isolated)
Digital I/O Front Galvanically isolated digital I/O M12 connector
Extension Front Galvanically isolated extension ports M12 connector
Mob 1 Front TNC female connectors for MIMO mobile antenna 1
Mob 2 Front TNC female connectors for MIMO mobile antenna 2
WLAN 1 Front TNC female connectors for MIMO WLAN antenna
WLAN 2 Front TNC female connectors for MIMO WLAN antenna
GNSS
Front TNC female connector for GPS/GLONASS antenna
Reset Front Reset button, press at least 3 seconds for reboot and at least
10 second for a factory reset. The start of the factory reset is
confirmed by all LEDs lighting up for a second. The button
can be released then again.
Table 3.2.: NB3711 Interfaces
15