NetModule NB3711, User Manual

Page: 56 / 214

NB3711 User Manual 4.0
WLAN Configuration
Running in
client
mode, it is possible to connect to one ore more remote access-points.
The system will switch to the next network in the list in case one goes down and
return to the highest-prioritized network as soon as it comes back. You can perform
a WLAN network scan and pick the settings from the discovered information directly.
The authentication credentials have to be obtained by the operator of the remote access
point.
Parameter WLAN Client Configuration
SSID The network name (called SSID)
Security mode The desired security mode
WPA/WPA2 mixed
mode
WPA2 should be preferred over WPA1, running
WPA/WPA2 mixed-mode offers both.
WPA cipher The WPA cipher to be used, the default is to run both
(TKIP and CCMP)
Identity The identity used for WPA-RADIUS and WPA-EAP-TLS
Passphrase The passphrase used for authentication with WPA-PSK,
otherwise the key passphrase for WPA-EAP-TLS
Force PMF Enables Protected Management Frames
Required signal strength Required signal strength to esablish the connection
56