NetModule NB3711, User Manual

Page: 163 / 214

NB3711 User Manual 4.0
Parameter Automatic File Configuration
Status Enable/disable an automatic configuration update
Time of day Time of day when the system should check for updates
URL The URL where the configuration file should be retrieved
from (supported protocols are HTTP, HTTPS, TFTP, FTP)
Factory Configuration
Figure 5.58.: Factory Configuration
This menu can be used to reset the device to factory defaults. Your current configuration
will be lost. This procedure can also be initiated by pressing and holding the
Reset
button for at least five seconds. A successfully initiated factory reset can be noticed by
all LEDs having been turned on. The factory reset will set the IP address of the first
Ethernet interface back to 192.168.1.1. You will be able to communicate again with
the device using the default network parameters. You may store the currently running
configuration as factory defaults which will reside active even when a factory reset has
been initiated (e.g. by your service staff).
Please ensure that this corresponds to a working configuration. A real factory reset to
163