4. Select Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Backup button.
6. Choose a location to store the file on your computer.
The name of the backup file is
NETGEAR_WAC104.cfg
.
7. Follow the directions of your browser to save the file.
Restore the settings
If you backed up the configuration file, you can restore the configuration from this file.
To restore configuration settings that you backed up:
1. Connect your computer or mobile device to the AP in one of the following ways:
•
Connect directly to the AP’s WiFi network or LAN.
•
Connect to the same network that the AP is connected to.
2. Launch a web browser and enter http://www.aplogin.net (or aplogin.net) in the
address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use aplogin.net on page 24.
A login window displays.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The Home page displays.
4. Select Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Browse button and navigate to and select the saved configuration file.
The name of the backup file from which you can restore the configuration is
NETGEAR_WAC104.cfg
.
6. Click the Restore button.
The configuration is uploaded to the AP. When the restoration is complete, the AP
reboots. This process takes about two minutes.
User Manual
51
Manage the AP and Monitor the
Traffic
802.11ac Wireless Access Point Model WAC104
