network selection in your WiFi-enabled computer or mobile device to match the
current settings for your network.
• Does your WiFi device display as an attached device? (See View devices on the
network on page 59.) If it does, it is connected to the network.
• Are you using the correct network name (SSID) and password?
Configure WEP legacy WiFi security
Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption
mode that is superseded by WPA-PSK and WPA2-PSK. WEP limits the WiFi transmission
speed to 54 Mbps (the AP is capable of speeds of up 300 Mbps in the 2.4 GHz band).
Tip: If you want to change the WiFi settings of the AP’s network, use a wired connection
to avoid being disconnected when the new WiFi settings take effect.
To configure WEP security:
1. Enter the AP user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The Home page displays.
2. Select Setup > Wireless Setup.
The Wireless Network page displays.
3. In the Wireless Network (2.4GHz b/g/n) section, from the Mode menu, select Up to
54 Mbps.
The page adjusts to display the WEP radio button.
User Manual
39
Manage the Basic WiFi Network
Settings
802.11ac Wireless Access Point Model WAC104
