manualshive.com logo in svg

NETGEAR UTM10 - ProSecure Unified Threat Management Appliance, Reference Manual

The NETGEAR UTM10 - ProSecure Unified Threat Management Appliance offers robust security features to protect your network. Stay informed with the Reference Manual, available for free download from manualshive.com. Get the most out of your device with the comprehensive manual at your fingertips.

Share
Download
background image

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

8-36

Virtual Private Networking Using SSL Connections

v1.0, September 2009

Apply 
Policy For
(continued)

IP Network

Policy Name

A descriptive name of the SSL VPN policy for identification 
and management purposes.

IP Address

The network IP address to which the SSL VPN policy is 
applied.

Subnet Mask The network subnet mask to which the SSL VPN policy is 

applied.

Port Range / 
Port Number

A port (enter in the Begin field) or a range of ports (enter in 
the Begin and End fields) to which the SSL VPN policy is 
applied. Ports can be 0 through 65535. The policy is applied 
to all TCP and UDP traffic that passes on those ports. Leave 
the fields blank to apply the policy to all traffic.

Service

From the pull-down menu, select the service to which the 
SSL VPN policy is applied:
•

VPN Tunnel

. The policy is applied only to a VPN tunnel.

•

Port Forwarding

. The policy is applied only to port 

forwarding.

•

All

. The policy is applied both to a VPN tunnel and to port 

forwarding.

Permission

From the pull-down menu, select whether the policy permits 
(PERMIT) or denies (DENY) access.

All 
Addresses

Policy Name

A descriptive name of the SSL VPN policy for identification 
and management purposes.

Port Range / 
Port Number

A port (enter in the Begin field) or a range of ports (enter in 
the Begin and End fields) to which the SSL VPN policy is 
applied. Ports can be 0 through 65535. The policy is applied 
to all TCP and UDP traffic that passes on those ports. Leave 
the fields blank to apply the policy to all traffic.

Service

From the pull-down menu, select the service to which the 
SSL VPN policy is applied:
•

VPN Tunnel

. The policy is applied only to a VPN tunnel.

•

Port Forwarding

. The policy is applied only to port 

forwarding.

•

All

. The policy is applied both to a VPN tunnel and to port 

forwarding.

Permission

From the pull-down menu, select whether the policy permits 
(PERMIT) or denies (DENY) access.

Table 8-10. 

Add Policy 

Settings (continued)

 Item

Description (or Subfield and Description)

Summary of Contents for UTM10 - ProSecure Unified Threat Management Appliance

































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for UTM10 - ProSecure Unified Threat Management Appliance

Watchguard Firebox V10 Hardware Manual preview
Firebox V10
Brand: Watchguard Pages: 20
Fortinet FortiGate FortiGate-5001SX Security System Manual preview
FortiGate FortiGate-5001SX
Brand: Fortinet Pages: 36
D-Link 800 - DFL 800 - Security Appliance User Manual preview
800 - DFL 800 - Security Appliance
Brand: D-Link Pages: 469
Lanner NCA-5530 User Manual preview
NCA-5530
Brand: Lanner Pages: 120
IBASE Technology FWA6604 series User Manual preview
FWA6604 series
Brand: IBASE Technology Pages: 17
Innominate mGuard Reference Manual preview
mGuard
Brand: Innominate Pages: 260
Watchguard Firebox T85 Quick Start Manual preview
Firebox T85
Brand: Watchguard Pages: 2
Global Technology Associates GB-800 Brochure preview
GB-800
Brand: Global Technology Associates Pages: 2

Brands by name

Popular brands

Load more brands