ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Virtual Private Networking Using IPsec Connections
7-15
v1.0, September 2009
7.
Click on the disk icon to save the configuration, or select
File
>
Save
from the Security Policy
Editor menu.
8.
In the left frame, click
Security Policy
. The screen adjusts.
ID Type
From the pull-down menu, select
Domain Name
. Then, below, enter the
remote FQDN that you entered on the UTM’s VPN Wizard screen (see
Figure 7-9 on page 7-9
). In this example, the domain name is
utm_remote.com.
Secure Interface
Configuration
Leave the default setting, which is the
Disabled
selection from the Virtual
Adapter pull-down menu.
Internet Interface
Leave the default setting, which is the
Any
selection from the Name pull-down
menu.
Figure 7-14
Table 7-5. Security Policy Editor: My Identity Settings (continued)
Setting
Description (or Subfield and Description)